The extended finite element method combined with a modal synthesis approach for vibro-acoustic problems

An Extended Finite Element Method Applied to Levitated Droplet Problems

We consider a standard model for incompressible two-phase flows in which a localized force at the interface describes the effect of surface tension. If a level set method is applied then the approximation of the interface is in general not aligned with the triangulation. This causes severe difficulties w.r.t. the discretization and often results in large spurious velocities. In this paper we re...

Finite Element and Boundary Element Methods for Transient Acoustic Problems

The paper focuses on the numerical treatment of transient acoustic problems using finite element (FE) and boundary element (BE) methods. The FE method relies on a pressure formulation and the use of an implicit integration schemes for solving the related second-order differential system. The procedure is shown on cavity (interior) problems but can be extended to exterior problems using the DtN ...

A combined parabolic-integral equation approach to the acoustic simulation of vibro-acoustic imaging.

This paper aims to model ultrasound vibro-acoustography to improve our understanding of the underlying physics of the technique thus facilitating the collection of better images. Ultrasound vibro-acoustography is a novel imaging technique combining the resolution of high-frequency imaging with the clean (speckle-free) images obtained with lower frequency techniques. The challenge in modeling su...

A numerical method for vibro-acoustic problems with sheared mean flows

Extended Finite Element Method for Statics and Vibration Analyses on Cracked Bars and Beams

In this paper, the extended finite element method (XFEM) is employed to investigate the statics and vibration problems of cracked isotropic bars and beams. Three kinds of elements namely the standard, the blended and the enriched elements are utilized to discretize the structure and model cracks. Two techniques referred as the increase of the number of Gauss integration points and the rectangle...