The feasibility of a cyanide-free silver plating bath.
نویسندگان
چکیده
منابع مشابه
Mirror-Bright Silver Plating from a Cyanide-Free Bath
ilver has good electric conductivity and solderability and possesses S excellent electric characteristics as a contact and is thus widely used for plating electronic industrial parts. A cyanide plating bath is most often used, but the cyanide compounds have strong toxicity and a large amount of the cost is rxpkd for securing safe working conditions and waste treatment. Because of this, many cya...
متن کاملElectrolytic recovery of silver from low concentrated silver cyanide spent plating solutions
Cyanide silver solution containing 200 to 1000 mg L silver ions were used for recovery studies. The nature of the silver deposit was studied using a Hull cell, and the current density range was selected for electrolysis to recover silver. A batch electrochemical reactor, consisting of a planar stainless steel cathode and platinum anode was used and silver was recovered at 0?04 to 0?2 A dm. The ...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
Electroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملFormation of Au Microbump Arrays for Flip-Chip Bonding Using Electroless Au Deposition from a Non-Cyanide Plating Bath
The formation of Au microbump arrays for flip-chip bonding was investigated using an electroless Au plating bath. Generally, electroless Au deposition gives a low deposition rate, preventing the fabrication of Au bumps with heights of more than 5 μm. To overcome this problem, we developed a new electroless Au deposition process that employs a non-cyanide bath. This process delivers a high depos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1990
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.41.1178