The Finite Element Analysis for Sluice Chamber Structure Based on ANSYS

Finite Element Analysis on Crane Girder with Variable Cross Sections Based on ANSYS

To the 36 meters crane girder with trapezoidal variable cross-section in a steel plant, finite element model is established reasonably according its actual size. The calculation of crane girder structure was introduced by using the finite element analysis software ANSYS. The local stress state of the cross-section is investigated and the stress concentration position of variable cross-section i...

An Algorithm for Finite Element Analysis of Tunnel Supports Based on the Winkler’s Theory

An Algorithm for Finite Element Analysis of Tunnel Supports Based on the Winkler’s Theory

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

A New Stress Based Approach for Nonlinear Finite Element Analysis

This article demonstrates a new approach for nonlinear finite element analysis. The methodology is very suitable and gives very accurate results in linear as well as in nonlinear range of the material behavior. Proposed methodology can be regarded as stress based finite element analysis as it is required to define the stress distribution within the structural body with structural idealization a...