The hot cathode argon gas-filled rectifier

Pressure effect on a tandem hollow cathode discharge in argon

orous NiTi by creep expansion of argon-filled pores

NiTi powders are densified in the presence of argon gas, whose initial pressure is varied between 1 and 33 atm, to create NiTi billets containing isolated Ar-filled pores. Upon vacuum annealing, the pressurized pores expand by creep of the surrounding NiTi matrix at rates which are in agreement with a simple analytical model up to 16% porosity. Beyond this porosity, foaming becomes very slow, a...

Unusual contact burn due to argon gas.

Hollow Cathode Discharges for Gas Lasers

With the exception of the 632.8 nm neon line all the important visible and ultraviolet cw gas laser lines belong to the spectra of ionized atoms. To achieve proper laser oscillation the excitation of the upper levels of these lines is of primary importance. High energy electrons are needed for this process. As such electrons are in high concentration in the hollow cathode discharge, it was obvi...

Argon-shielded hot pressing of titanium alloy (Ti6Al4V) powders.

The paper presents the method of the argon - shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride - dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800-850 degrees C for different lengths of time. An unoxidized sintered material, ...