The Metallography of Tungsten Steels

Color metallography; a suitable method for characterization of martensite and bainite in multiphase steels

Color metallography is a useful method for characterizing microstructures of steels with multiple phases. In this paper, application of three different color etching techniques for a bainitic-martensitic steel is reported. Comparisons between the results showed that 10% Na2S2O5 aqueous solution was the best etchant for distinguishing martensite, bainite and ferr...

Color Metallography

Fig. 2 Microstructure of as-cast Au22%Al showing the “purple plague,” AuAl2 intermetallic (reddish), surrounded by the Al-AuAl2 eutectic after polishing to a 1 lm finish. Magnification bar is 50 lm long. Fig. 1 Microstructure of a porous high-carbon steel powder metallurgy specimen infiltrated with copper showing the natural color of the copper, which is easier to see when the steel has been ti...

The Metallography of Impact Fatigue

Metallography of Aluminium alloys

This lecture aims at providing a survey of the metallographic techniques available for the examination of aluminium and its alloys. The information must be sufficient to be sure that the students and the users are able to choose the most suitable technique to solve their problems in the examination of samples. The lecture should contain a direct understanding of the main problems in the metallo...

Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels

The effects of tungsten (W) additions (0, 0.1, 0.5 and 1 wt.%) on the hydrogen embrittlement behaviour of microalloyed steels were systematically investigated by means of slow strain rate tests on circumferentially notched cylindrical specimens, and the mechanism of hydrogen-induced embrittlement was discussed. W addition is found to increase the activation energy of hydrogen desorption. Micros...