The Optimum Process on Continuous Casting and Hot Strip Mill
نویسندگان
چکیده
منابع مشابه
Integration of Continuous Caster and Hot Strip Mill Planning for Steel Production 9/11/99 Integration of Continuous Caster and Hot Strip Mill Planning for Steel Production
In this paper we present a model and a solution approach for integration of steel continuous casters and hot strip mills to provide more responsive steel production at lower unit cost. We describe the production environment and survey existing methods for planning continuous casters and hot strip mills. Since these processes lie at the solid/liquid interface we use “virtual” slabs, correspondin...
متن کاملMetallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling
It is not rare to observe an inverse relationship between hot strength determined from rolling load of the finishing stands of the hot strip mill and strain. This situation was already described in the literature and is explained by the use of inverse rolling load models that assumes sticking friction in the determination of hot strength. The aim of this work was to show that this “work softeni...
متن کاملThermal Simulation of Solidification Process in Continuous Casting
In this study, a mathematical model is introduced to simulate the coupled heat transfer equation and Stefan condition occurring in moving boundary problems such as the solidification process in the continuous casting machines. In the continuous casting process, there exists a two-phase Stefan problem with moving boundary. The control-volume finite difference approach together with the boundary ...
متن کاملSolidification and thermal performance analysis of the low carbon steel during the continuous casting process
The present paper evaluates the effect of the nozzle characteristics on the heat transfer and phase change of the low carbon steel during the continuous casting process. A three-dimensional energy equation and a solidification model are used to drive the governing equation of the phase change and temperature distribution. A linear relation is obtained to predict the temperature-dependent of the...
متن کاملPlastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation
In the present investigation, two dimensional elastoplastic finite element analysis was conducted to assess the deformation characteristics of Al 1100 alloy during continuous confined strip shearing (C2S2) process. The results of simulations showed that the plastic strain distribution across the deformed sample is non-uniform irrespective of the amount of friction and C2S2 die angle. The most u...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1988
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.74.7_1346