The Out-of-Plane Compression Behavior of Cross-Ply AS4/PEEK Thermoplastic Composite Laminates at High Strain Rates
نویسندگان
چکیده
منابع مشابه
Deflection of Cross-Ply Composite Laminates Induced by Piezoelectric Actuators
The coupling effects between the mechanical and electric properties of piezoelectric materials have drawn significant attention for their potential applications as sensors and actuators. In this investigation, two piezoelectric actuators are symmetrically surface bonded on a cross-ply composite laminate. Electric voltages with the same amplitude and opposite sign are applied to the two symmetri...
متن کاملInfluence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels
In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...
متن کاملPlane Behaviour at High Strain Rates of a Quasi-Unidirectional E-Glass/Polyester Composite : Impact Application
Dealing with the plane behaviour of a composite quasi-unidirectional elementary ply made of E glasslpolyester, this paper contributes to the study of impact phenomena on ceramic/composite bi-layered targets. Firstly, a quasistatic modelisation of the elementary ply behavior, in plane tensile and plane shear, is presented. It allows a good description of the residual strains and of stiffness los...
متن کاملPress Forming a 0 / 90 Cross - Ply Advanced Thermoplastic Composite Using the Double - Dome Benchmark Geometry
A pre-consolidated thermoplastic advanced composite cross-ply sheet comprised of two uniaxial plies orientated at 0/90 has been thermoformed using tooling based on the double-dome bench-mark geometry. Mitigation of wrinkling was achieved using springs to apply tension to the forming sheet rather than using a friction-based blank-holder. The shear angle across the surface of the formed geometry ...
متن کاملAcoustic emission monitoring of degradation of cross ply laminates.
The scope of this study is to relate the acoustic activity of damage in composites to the failure mechanisms associated with these materials. Cross ply fiber reinforced composites were subjected to tensile loading with recording of their acoustic activity. Acoustic emission (AE) parameters were employed to monitor the transition of the damage mechanism from transverse cracking (mode I) to delam...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2018
ISSN: 1996-1944
DOI: 10.3390/ma11112312