THE PRESENTATION OF RESISTANCE SPOT WELDING PARAMETER “EQR” THAT DETERMINES WELDED JOINT TENSILE STRENGTH
نویسندگان
چکیده
منابع مشابه
Effect of Welding Conditions of Spot Welded Zone on the Tensile Strength about Aluminum Alloy (A6061)
It is considered to be available in reducing the weight of automobiles that the aluminum alloy is applied to manufacture them. The spot welding of aluminum alloys is difficult because of high welding current and small electrical resistance. It is necessary to clarify the relation between the nugget formation and the welding conditions. In this study, the relation between the spot welding condit...
متن کاملLaser Welded versus Resistance Spot Welded Bone Implants: Analysis of the Thermal Increase and Strength
INTRODUCTION The first aim of this "ex vivo split mouth" study was to compare the thermal elevation during the welding process of titanium bars to titanium implants inserted in pig jaws by a thermal camera and two thermocouples. The second aim was to compare the strength of the joints by a traction test with a dynamometer. MATERIALS AND METHODS Six pigs' jaws were used and three implants were...
متن کاملTensile Properties of Ferrite-austenitic Welded Joint
Very often, in order to optimized welded constructions, some of their parts are made of heterogeneous steels. For example, microalloyed steels are in use for cars chassis making and high alloyed steels for different constructions making. From that reason, it’s not rare to find welded joints between ferrite microalloyed and austenitic highalloyed steels. As a rule, these joints are welded by usi...
متن کاملEffect Of Process Parameters On The Strength Of Aluminium Alloy A5052 Sheets Joint Welded By Resistance Spot Welding With Cover Plates
Resistance spot welding (RSW) is the most popular joining technique used by automotive industries for the manufacture of automobile body structure. In automobile industries, the weight saving effect of replacing steel parts is an important factor in reducing fuel consumption and increasing speed and natural resources savings. In this study, A5052 aluminium alloy sheet having 1 mm thickness were...
متن کاملEffect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks
In the present study, parameters of tool rotation speed, tool travel speed and tool offsetting with different levels were used in the friction stir welding (FSW) of aluminum-copper tailor welded blanks (TWBs). The FSW of pure copper to 5052 aluminum alloy were carried out by varying tool rotation speed from 800 rpm to 1200 rpm, tool travel speed from 40 mm/min to 80 mm/min and tool offsetting f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2011
ISSN: 1881-8153,1340-4202
DOI: 10.3130/aijs.76.1559