Theoretical Analysis on Needle-Punched Carbon/Carbon Composites

Behavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading

Mechanical Properties of Needle-Punched Fabrics in Relation to Fiber Orientation

Thermal resistance and air permeability of jute-polypropylene blended needle- punched nonwoven

Thermal resistance and air permeability of needle-punched nonwoven fabric made from jute and polypropylene blends have been studied using the Box and Behnken factorial design to observe the effect of fabric weight, needling density and blend proportion on thickness, thermal resistance, specific thermal resistance, air permeability and sectional air permeability. Correlation matrix and cluster a...

3 Theoretical properties of the ” projected composites ”

The new possibility to explain the nature of the thermal X-ray composites (TXCs) as projection effect of 2-or 3-dimensional shell-like supernova remnants (SNRs) evolved in a nonuniform medium is proposed. X-ray and radio morphologies as well as basic theoretical features of such an SNR and surrounding medium are considered. It is shown that the theoretical properties of the shell-like SNR evolv...

Flexural Behavior of Needle Punch Glass/jute Hybrid Mat Composites

In this research, creation of higher mechanical natural fiber mat composites was proposed. The hybrid mat with jute and glass mat was fabricated by needle punching system, in which jute mat was placed on glass mat. The ratio of jute and glass mat layers was set to be 1:0,1:1,1:2 and 2:1, respectively. The composites were fabricated by hand-lay up method with unsaturated polyester resin after ne...