Theory on deformation behavior of a liquid droplet impinging onto hot metal surface.
نویسندگان
چکیده
منابع مشابه
Solidification of Impinging Molten Metal Droplet on a Cold Substrate
The phenomenon of impingement and solidification of a molten metal droplet on a substrate occurs in processes like thermal spray coating and spray casting. Molten metal droplet after impingement over a substrate becomes a splat after spreading and solidification. The phenomenon of spreading and solidification of a droplet can be understood by mathematical modeling. In the present work, the spre...
متن کاملA Numerical Study of a Droplet Impinging on a Liquid Surface
The Navier–Stokes equations for unsteady, incompressible, viscous fluids in the axisymmetric coordinate system are solved using a control volume method. The volume-of-fluid (VOF) technique is used to track the free-surface of the liquid. Model predictions are in good agreement with experimental measurements. It is found that the dynamic processes after impact are sensitive to the initial drople...
متن کاملAn experimental study of a water droplet impinging on a liquid surface
An experimental study is presented for water droplet impingement on a liquid surface. The impaction process was recorded using a high-speed digital camera at 1,000 frames/s. The initial droplet diameter was fixed at 3.1 mm ± 0.1 mm, and all experiments were performed in atmospheric air. The impact velocity was varied from 0.36 m/s to 2.2 m/s thus varying the impact Weber number from 5.5 to 206....
متن کاملDynamic and Deformation of a liquid Droplet in a Convective Two-Dimensional Laminar Flow
The objective of this research is to develop an accurate numerical method to be used in showing the deformation of a liquid fuel droplet in a convective field. To simultaneously solve the internal liquid droplet flow field as well as the external gas phase flow field, a nonstaggered rectangular grid system without any coordinate transformation is used. Transition from the gas field to the liqui...
متن کاملEffects of Carbon on the Microstructure and Hot Deformation Behavior
The effects of carbon content on the dynamic and static softening mechanisms of Ti microalloy steels were investigated both in ferrite and austenite regions. 
The results obtained showed that recrystallization rate decreased as the percentage of carbon content was increased from 0.0035 to 0.110. This is due to the Ti(CN) and TiC precipitates and also the free carbon content. In the ferrite r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Iron and Steel Institute of Japan
سال: 1981
ISSN: 0021-1583,1881-1183
DOI: 10.2355/isijinternational1966.21.583