Thermal expansion of artificial graphite and carbon
نویسندگان
چکیده
منابع مشابه
Thermal expansion coefficient of hydrogenated amorphous carbon
The coefficient of thermal expansion ~CTE! of hydrogenated amorphous carbon (a-C:H) was investigated as a function of the concentration of sp hybridization. The CTE, determined using the thermally induced bending technique, depends on the concentration of sp bonded carbon, increasing to the value of graphite as the sp concentration approaches 100%. By using a combination of the thermally induce...
متن کاملComposites of aluminum alloy and magnesium alloy with graphite showing low thermal expansion and high specific thermal conductivity
High thermal conductivity, low thermal expansion and low density are three important features in novel materials for high performance electronics, mobile applications and aerospace. Spark plasma sintering was used to produce light metal-graphite composites with an excellent combination of these three properties. By adding up to 50 vol.% of macroscopic graphite flakes, the thermal expansion coef...
متن کاملThermal Expansion of Carbon Nanofiber-Reinforced Multiscale Polymer Composites
Improved dimensional stability of composites is desired in applications where they are exposed to varying temperature conditions. The current study aims at analyzing the effect of vapor-grown carbon nanofibers (CNFs) on the thermal expansion behavior of epoxy matrix composites and hollow particlefilled composites (syntactic foams). CNFs have a lower coefficient of thermal expansion (CTE) than e...
متن کاملinvestigation of the electronic properties of carbon and iii-v nanotubes
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
15 صفحه اولTHERMAL STABILITY STUDIES OF LI-ION CELL NEGATIVE ELECTRODE MATERIALS: GRAPHITE, MCMB, HARD-CARBON AND InSb
A Li-ion cell typically consists of a carbon-based negative electrode (NE); a porous polymer membrane separator (polypropylene and/or polyethylene); and a lithiated transition metal oxide (LiMxOy, M=Co, Ni, and/or Mn) positive electrode (PE). Electrodes are made by casting slurries of PE or NE-materials, PVDF-binder and carbon-black onto metal current collectors. Mixtures of Li-salts and organi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Research of the National Bureau of Standards
سال: 1934
ISSN: 0091-0635
DOI: 10.6028/jres.013.005