Thermal hydraulics of water cooled divertors
نویسندگان
چکیده
منابع مشابه
Validation of Reactor Physics-thermal Hydraulics Coupled Calculation in Water-cooled Research Reactors with Laminar Flow Regimes
A collaboration between the University of Florida and the Swiss Federal Institute of Technology, Lausanne (EPFL) has been formed to develop and validate detailed coupled multiphysics models of the zero-power (100 W) CROCUS reactor at EPFL and the 100 kW University of Florida Training Reactor, for the comprehensive analysis of the reactor behavior under transient (neutronic or thermal-hydraulic ...
متن کاملThermal Hydraulics Design Limits
The following discussion of PWR steady state and transient design limits is extracted from the theses of Carter Shuffler and Jarrod Trant while the BWR discussion is extracted from Paolo Ferroni's thesis (covers steady state only). These limits are a simplified and narrower discussion than the relevant NRC standard review plan you will also be referred to. All materials are directly extracted f...
متن کاملThermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model
Thermal hydraulics of nuclear reactor as a basis of reactor safety has a very important role in reactor design and control. The thermal-hydraulic analysis provides input data to the reactor-physics analysis, whereas the latter gives information about the distribution of heat sources, which is needed to perform the thermal-hydraulic analysis. In this study single heated channel model as a very f...
متن کاملHydraulics of Vascular Water Transport
The science of plant water transport is equal parts of physics and biology. Plants have evolved a complex wick system that harnesses the cohesive hydrogen bond energy of liquid water and suppresses the heterogeneous nucleation of caVitation. Trade-offs between making the wick safe against cavitation and implosion, yet efficient in moving water, result in the process being limiting to plant perf...
متن کاملAppendix 1 Thermal Hydraulics, Draft for Comment
Several different fuel failure criteria have been used in previously NRC-sponsored SFP accident studies. Benjamin, et. al. used the onset of runaway fuel clad oxidation as the fuel failure criterion in NUREG/CR-0649 [Ref. 1]. This criterion was criticized because clad rupture can occur at a relatively low temperature causing a gap release. The consequences of gap release can be significant if t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fusion Engineering and Design
سال: 2001
ISSN: 0920-3796
DOI: 10.1016/s0920-3796(01)00258-7