Thermal-hydrolysis Treatment for Plating Waste Liquid.
نویسندگان
چکیده
منابع مشابه
An Example of Economic Plating Waste Treatment by Reverse
The large volumes of water used in rinsing operations in the plating industry may contain cyanides, chromium, nickel, and zinc, resulting in a substantial loss of valuable plating chemicals. From an economic viewpoint, particular consideration should be given to measures that will permit recovery of chemicals and water for reuse. In view of the wide variety of conditions found in plating practi...
متن کاملSubcritical Water Hydrolysis Treatment of Waste Biomass for Nutrient Extraction
Nutrients were extracted from corn stalks, peanut shells, de-oiled peanut meal, chicken manure, and sewage sludge by a subcritical water (SCW) hydrolysis reaction. Compared with the other feedstock, the aqueous phases extracted from de-oiled peanut meal showed the highest watersoluble organic carbon, amino acid, total nitrogen, and phosphorus contents. The effects of solution pH, final hydrothe...
متن کاملWaste Minimization in Chromium Plating Industry Waste Minimization in Chromium Plating Industry
Membrane electrolysis (ME) is the only commercial technology using ion-exchange membranes for chromic acid recycling and recovery. On one hand, the technology has a number of promising advantages, but on the other hand, it has not yet gained common acceptance probably due to a lack of operation stability and efficiency. Published results of the research can be divided into three categories: lab...
متن کاملThermal hydrolysis for sewage treatment: A critical review.
A review concerning the development and applicability of sewage sludge thermal hydrolysis especially prior to anaerobic digestion is presented. Thermal hydrolysis has proven to be a successful approach to making sewage sludge more amenable to anaerobic digestion. Currently there are 75 facilities either in operation or planning, spanning several continents with the first installation in 1995. T...
متن کاملSynthesis of Cuprous Oxide by Thermal Treatment in Liquid Paraffin
Cu2O nanoparticles were synthesized by thermal treatment in liquid paraffin without any inert gas protection using nano structures of Schiff base copper (II) complex (1) as precursor. Liquid paraffin was used as solvent and reductant. Span 80 was applied to control the morphology of cuprous oxide nanoparticles. The nano structure of the complex was characterized by X-ray diffraction measurement...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1995
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.46.47