Thermal oxidation curing polycarbosilane fibers by alternating air and vacuum process

Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading

An experimental investigation was conducted to find the effect of spraying method of coating of Thermal Barrier Coatings (TBCs) on their oxidation behaviour and resistance to various thermal loading. Isothermal and thermal shock tests were performed in order to study oxidation behaviour of air plasma sprayed Bond Coat (BC) and assess its effect on TBCs lifetime under the stated loadings. Specim...

Temperature-dependent Dielectric Measurements of Polyacrylonitrile Fibers during Air Oxidation

Simple direct-current (DC) electrical conductivity measurements are widely used to measure the degree of carbon fiber processing during the latter stages of the carbonization, and during the graphitization, of polyacrylonitrile (PAN) fiber. Unfortunately, DC conductivity measurements are not possible for the oxidation stage and for the early stages of carbonization because the PAN conductivity ...

The study of leachate treatment by using three advanced oxidation process based wet air oxidation

Wet air oxidation is regarded as appropriate options for wastewater treatment with average organic compounds. The general purpose of this research is to determine the efficiency of three wet air oxidation methods, wet oxidation with hydrogen peroxide and absorption with activated carbon in removing organic matter and nitrogenous compounds from Isfahan's urban leachate. A leachate sample with th...

Analysis Of Vacuum Failures During Curing Of

Carbon fiber reinforced Composite structures posses‟ high strength and stiffness to weight ratios, also exhibits good fatigue resistance, and are less prone to deterioration caused by corrosion and cracking. Fabrication of these composite structures is highly process dependent. During curing process, the physical, mechanical and chemical properties are imparted to the components, and are genera...

Nonthermal combined ultraviolet and vacuum-ultraviolet curing process for organosilicate dielectrics