Thermal oxidation kinetics of additive free polyamide 6-6
نویسندگان
چکیده
منابع مشابه
Expandable graphite/polyamide-6 nanocomposites
Polyamide-6 (PA-6)/graphite nanocomposites were prepared by melt blending, using a variety of graphites, including virgin graphite, expandable graphites and expanded graphite. The resulting nanocomposites were characterized by X-ray diffraction, thermogravimetric analysis, cone calorimetry, and tensile mechanical analysis. Nanocomposite formation does occur, as denoted by the nanometre dispersi...
متن کاملInterfacial studies of polyamide 6 composites filled with oxidation carbon fiber
In this work, ozone modification method and air-oxidation are used for the surface treatment of polyacrylonitrile(PAN)based carbon fiber. The surface characteristics of carbon fibers are characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites are investigated by means of the single fiber pull-out tests. As a ...
متن کاملMulti‐jet electrospinning of polystyrene/ polyamide 6 blend: thermal and mechanical properties
Introduction Electrospinning process is broadly used to obtain membrane-like webs with submicron to micron fibers (Li and Xia 2004). Electrospun nanofibers, with its large surface area and multiple pores, can be used to construct unique functional nanostructures for composites, filtration membranes, biomaterials, and breathable textile fabrics (Greiner and Wendorff 2007; Li and Xia 2004; Pham e...
متن کاملPolyamide 6/Multiwalled Carbon Nanotubes Nanocomposites with Modified Morphology and Thermal Properties
Pure polyamide 6 (PA6) and polyamide 6/carbon nanotube (PA6/CNT) composite samples with 0.5 weight percent loading of pristine or functionalized CNTs were made using a solution mixing technique. Modification of nanotube surface as a result of chemical functionalization was confirmed through the presence of lattice defects as examined under high-resolution transmission electron microscope and ab...
متن کاملEvolution of collective damage in a polyamide 6–silicate nanocomposite
The microvoiding in crack-tip plastic zone in a partly exfoliated polyamide 6–silicate nanocomposite is investigated through the experimental measurement of microvoid size distribution and the computer simulation in context of nonlinear fracture mechanics. In order to analyze the effect of silicate content on fracture resistance, the evolution of the collective microvoids induced by the silicat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Degradation and Stability
سال: 2013
ISSN: 0141-3910
DOI: 10.1016/j.polymdegradstab.2012.11.002