Thermal performance analysis of organic flash cycle using R600A/R601A mixtures with internal heat exchanger

نویسندگان

چکیده

In this study, the thermal performance of an internal heat exchanger-organic flash cycle system driven by geothermal water was investigated. The R600a/R601a mixtures were selected as working fluid. effects mole fraction on absorption capacity heater, temperature rise cold fluid in exchanger, net power output, efficiency, and electricity generation costs analyzed. outputs, costs, efficiency simple organic systems com-pared. Results showed that using (0.7/0.3 fraction) has largest which increased output 3.68% 42.23% over R601a R600a systems, respectively. When 0.4, reduction (1.77% compared with system). exchanger can increase cycle, but does not necessarily increase.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of Gasketed-plate Heat Exchanger Performance Using Nanofluid

A heat exchanger using nanofluid needs to operate at optimum mass concentration level to get the maximum heat transfer performance. A numerical analysis is performed on the heat transfer and pressure drop of water-based γ-Al2O3 nanofluid gasketed-plate heat exchanger to specify its optimum conditions. Cold water will be heated by γ-Al2O3/water nanofluid. The results showed that optimal volume c...

متن کامل

Effect of Working-fluid Mixtures on Organic Rankine Cycle System Performance: Heat Transfer and Cost Analysis

A thermodynamic limitation of single-component working fluids in organic Rankine cycles (ORCs) is the large exergy destruction (and, consequently, useful power loss) associated with evaporation and condensation. Due to their non-isothermal phasechange behaviour, non-azeotropic working-fluid mixtures have shown reduced exergy losses, leading to improved cycle efficiencies and power outputs. Thes...

متن کامل

Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation

In this study, we analysed the thermal performance, thermal stability and optimum design analyses of a longitudinal, rectangular fin with temperature-dependent, thermal properties and internal heat generation under multi-boiling heat transfer using Haar wavelet collocation method. The effects of the key and controlling parameters on the thermal performance of the fin are investigated. The therm...

متن کامل

Cycle Performance and Heat Transfer Characteristics of a Heat Pump Using R22/R142b Refrigerant Mixtures

A heat pump system is constructed tO evaluate the performance and the heat transfer characteristics. Mixtures of R22/Rl42b are adopted in the heat pump. The heat transfer in the evaporator and the overall perfomance arc measured and analyzed in terms of the compositions and the flow rate of the refrigerants. The evaporator consists of counter~currem concentric circular tubes. Possibility of cap...

متن کامل

Effect of an Internal Heat Exchanger on Performance of the Transcritical Carbon Dioxide Refrigeration Cycle with an Expander

The effect of the internal heat exchanger (IHE) on the performance of the transcritical carbon dioxide refrigeration cycle with an expander is analyzed theoretically on the basis of the first and second laws of thermodynamics. The possible parameters affecting system efficiency such as heat rejection pressure, gas cooler outlet temperature, evaporating temperature, expander isentropic efficienc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Thermal Science

سال: 2021

ISSN: ['0354-9836', '2334-7163']

DOI: https://doi.org/10.2298/tsci200507296h