Thermal Processing of Thermal Coal Under Pressure to Produce Semi-Coke and Thermal Energy
نویسندگان
چکیده
The process of thermal processing brown coals grades 1B and 2B under external overpressure gases in the range 0–4.0 MPa is investigated. dependences main characteristics obtained products – semi-coke combustible gas-on pressure are established. material energy balances both coal given
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولThermal Model of Rapid Thermal Processing Systems
Continuously shrinking device parameters and the enlargement of wafer diameters in semiconductor industry require best temperature homogeneity in Rapid Thermal Processing (RTP). This together with the requirement of high ramp rates in the range of 200 °C s as advantageously used in ultra shallow junction processes [1] challenges temperature control in RTP technology. In order to design advanced...
متن کاملThermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock
Dense Silicon nitride was investigated to determine the effect of its microstructural parameters and densification on thermo-mechanical properties and thermal stress resistance to fracture initiation during a hot or cold mechanical and thermal shock testing. The different materials and microstructures were obtained by changing the parameters such as the type of the powder, additive, forming p...
متن کاملThermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock
Dense Silicon nitride was investigated to determine the effect of its microstructural parameters and densification on thermo-mechanical properties and thermal stress resistance to fracture initiation during a hot or cold mechanical and thermal shock testing. The different materials and microstructures were obtained by changing the parameters such as the type of the powder, additive, forming p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Žurnal Sibirskogo federal?nogo universiteta
سال: 2021
ISSN: ['2313-6014', '1997-1370']
DOI: https://doi.org/10.17516/1999-494x-0320