Thermal Stability of Chromium-Iron Oxidation Mixture Cermet-Based Solar Selective Absorbing Coatings

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pulsed plasma deposition of chromium oxide/chromium-cermet coatings

A novel radio frequency magnetron sputtering method for the deposition of composite films which consist of chromium oxide and chromium ~Cr2O3/Cr-cermet! is presented. As an extension to conventional reactive sputtering of a Cr target in an argon and oxygen atmosphere the oxygen flow into the process chamber is switched periodically on and off. This leads to an oscillating oxygen partial pressur...

متن کامل

A Review of Cermet-based Spectrally Selective Solar Absorbers

Spectrally-selective solar absorbers harvest solar energy in the form of heat. Solar absorbers using cermet-based coatings demonstrate a high absorptance of the solar spectrum and a low emittance in the infrared (IR) regime. Extensive work has been done to optimize cermet-based solar absorbers to achieve high performance by exploring different cermet (ceramic-metal composite) materials and film...

متن کامل

Thermal Conductivity, Phase Stability, and Oxidation Resistance of Y3Al5O12 (YAG)/Y2O3–ZrO2 (YSZ) Thermal-Barrier Coatings

This paper describes a new multilayer TBC that incorporates a 10 μm-thick oxygen barrier layer of yttrium–aluminum garnet (YAG) into a typical YSZ TBC system. The thermal conductivity of as-sprayed YAG/YSZ coatings was reduced due to excessive porosity and amorphous areas in the YAG layer. After long-term heat treatments, the conductivity of the multilayer was unaffected by the presence of YAG....

متن کامل

Influence of Vacuum Heat Treatment on the Residual Stress of Thermal Spray Cermet Coatings

and light microscopy were used to identify the changes after the heat-treatment. Microhardness and indentation modulus values were also investigated to analyse the changes in the mechanical properties after the heat-treatment. Results of this investigation indicated that the residual stress gradient within the coating material decreases after the heat-treatment, and the stress field in the subs...

متن کامل

Thermal Stability of Phosphate Coatings on Steel

P. Pokorny, M. Novak, L. Mastny Institute of Chemical Technology, Prague, Czech Republic P. Szelag Pragochema Prague, Department of Research of Surface Treatment of Metals, Prague, Czech Republic V. Brozek Institute of Plasma Physics ASCR Prague, Czech Republic The work was validated thermal stability of zinc, manganese and tri-cations phosphate coatings on steel, made from commercial phosphati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Molecules

سال: 2020

ISSN: 1420-3049

DOI: 10.3390/molecules25051178