Thermal Stress and Stress Intensity Factor Considering Temperature Dependent Material Properties. A Circular Disk under Constant Heat Flux.
نویسندگان
چکیده
منابع مشابه
Stress Intensity Factor Determination in Functionally Graded Materials, Considering Continuously Varying of Material Properties
In this paper, the plates made of functionally graded material (FGM) with and without a crack are numerically simulated, employing the finite element method (FEM). The material property variations are defined to be fully continuous; therefore, the elements can be as small as required. For this purpose, variations of the material properties are applied in both the integration points and in the n...
متن کاملStress Redistribution Analysis of Piezomagnetic Rotating Thick-Walled Cylinder with Temperature-and Moisture-Dependent Material Properties
In this article, the problem of time-dependent stress redistribution of a piezomagnetic rotating thick-walled cylinder under an axisymmetric hygro-thermo-magneto-electro-mechanical loading is analyzed analytically for the condition of plane strain. Using the constitutive equations, a differential equation is found in which there are creep strains. Primarily, eliminating creep strains, an analyt...
متن کاملA comparison of turbulent thermal convection between conditions of constant temperature and constant heat flux
We numerically investigate turbulent thermal convection driven by a horizontal surface of constant heat flux and compare the results with those of constant temperature. Below Ra≈ 10, where Ra is the Rayleigh number, when the flow is smooth and regular, the heat transport in the two cases is essentially the same. For Ra> 10 the heat transport for imposed heat flux is smaller than that for consta...
متن کاملMulti-boiling Heat Transfer Analysis of a Convective Straight Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation
In this study, by using the finite volume method, the heat transfer in a convective straight fin with temperature-dependent thermal properties and an internal heat generation under multi-boiling heat transfer modes are analyzed. In this regard, the local heat transfer coefficient is considered to vary within a power-law function of temperature. In the present study, the coexistence of all the b...
متن کاملEffects of Temperature-Dependent Material Properties on Stress and Temperature in Cracked Metal Plate under Electric Current Load
Using the finite element analyses, this paper discusses the effects of temperature-dependent material properties on the stress and temperature fields in a cracked metal plate under the electric current load. The practical and complicated results are obtained when the temperature-dependent material properties are adopted in the analysis. If the simplified (temperature-independent) material prope...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1997
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.46.1300