Thermionic Emission Characteristics on Current-Controlled Preheating of Fluorescent Lamp Cathodes.

Majority Carrier Transistor Based on Voltage-Controlled Thermionic Emission

A new type of transistor is proposed based on gate-controlled charge injection in unipolar semiconductor structures. Its design has some similarity with the recently fabricated triangular barrier diodes but contains an additional input circuit which allows an independent control of the barrier height for thermionic emission. This circuit is provided by a MOS gate on the semiconductor surface. I...

In-FEEP Thruster Ion Beam Neutralization with Thermionic and Field Emission Cathodes

Charge neutralization of an In-FEEP thruster was demonstrated with three different electron sources by zeroing the floating potential of the thruster and neutralizer system. The three cathodes used in the investigation include a mixed metal thermionic cathode, a carbon nanotube field emission cathode, and a Spindt-type Mo field emission array cathode. The field emission cathodes significantly i...

Simulation of Field-emission Cathodes for High Current Electron Injectors

From the prospect of the high average current electron injectors, the most important advantage of the fieldemission cathodes is their capability to generate very large current densities. Simulation of field-emission cathodes is complicated by the large range of spatial dimensions: from sub-micron scale, for a single field-emission tip, to millimeter scale, for a field-emitter array. To overcome...

On momentum conservation and thermionic emission cooling

Thermionic electron emission microscopy of metal-oxide multilayers on tungsten

Introduction Thermionic cathodes are used in many industrial vacuum electronic applications. Vacuum tubes for high-frequency or high-power applications are one example (e.g., see [1]). The emission properties of thermionic electron sources in vacuum devices are often Bimproved[ by the addition of oxide coatings on the metal cathode surface [2, 3]. The explanation of the improvement is usually b...