Thermo catalytic decomposition of methane over Cu - Al2O3 and 5 - 20wt% Ni - Cu - Al2O3 catalysts to produce hydrogen and carbon nanofibers

نویسندگان

چکیده

Hydrogen is an environmental friendly fuel, which has the potential to significantly used of fasil files; however several important challenges must defeat before it can be extensively used. Thermo catalytic decomposition methane (TCD) one most useful method, will meet future demand and hence attractive route for COx free production hydrogen essential in fuel cell. In present study, we made attempt on with Cu-Al2O3 5, 10, 15 & 20wt% Ni modified Ni/Cu-Al2O3 catalysts. It also observed that, conversion order Cu-Al2O3<5 wt% ~ 20 <15 < 10 while increasing loadings nickel efficiency thermo increasing. Among five catalysts prepared 10wt% catalyst showing good activity.SEM images after shows formation carbon nanofibers. XRD patterns 5,10,15 20wt%Ni/Cu-Al2O3 revealed, fairly crystalline peaks may responsible increase life The optimum 70 volume % was along fibers were found, as support. Copyright © 2016 VBRI Press.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Low-Temperature Catalytic Performance of Ni-Cu/Al2O3 Catalysts for Gasoline Reforming to Produce Hydrogen Applied in Spark Ignition Engines

The performance of Ni-Cu/Al2O3 catalysts for steam reforming (SR) of gasoline to produce a hydrogen-rich gas mixture applied in a spark ignition (SI) engine was investigated at relatively low temperature. The structural and morphological features and catalysis activity were observed by X-ray diffractometry (XRD), scanning electron microscopy (SEM), and temperature programmed reduction (TPR). Th...

متن کامل

N2O Decomposition over Cu–Zn/γ–Al2O3 Catalysts

Cu–Zn/γ–Al2O3 catalysts were prepared by the impregnation method. Catalytic activity was evaluated for N2O decomposition in a fixed bed reactor. The fresh and used catalysts were characterized by several techniques such as BET surface area, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The Cu–Zn/γ–Al2O3 catalysts exhibit high activity and stability for N2O decomposition in mi...

متن کامل

Hydrogen production from methanol decomposition over Pt/Al2O3 and ceria promoted Pt/Al2O3 catalysts

We present the activities and selectivities of Pt/Al2O3-based catalysts in the production of hydrogen from methanol through catalytic decomposition. For the decomposition reaction, the Pt and Pd catalysts promoted by ceria exhibit similar activity reaching 100% conversion at 315 C. Promoting with ceria had a positive effect on activity and selectivity. Among all catalysts, the 9% Pt– 10% CeO2/A...

متن کامل

Meso- and Nanostructuring of Industrial Cu/ZnO/(Al2O3) Catalysts

A concept is presented, which helps to rationalize the success of the industrially applied preparation route for Cu/ZnO/(Al2O3) catalysts. Many studies can be found in the open literature, which describe the critical dependency of the final catalyst’s properties on precursor chemistry. In line with previous reports, this concept identifies zincian malachite as the relevant precursor phase and i...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advanced materials proceedings

سال: 2021

ISSN: ['2002-441X', '2002-4428']

DOI: https://doi.org/10.5185/amp.2017/109