Thermo-mechanical couplings in elastomers - experiments and modelling
نویسندگان
چکیده
منابع مشابه
Thermal And Thermo-Mechanical Modelling of Polymer Overmoulded Electronics
This paper reports on the results from a research project investigating a novel technology for the manufacture of recyclable polymeric modules with embedded electronic controls and power distribution. The aim of this project is to develop a technology that fully encapsulates electronics for use in the demanding automotive environment. A two shot moulding technology will protect delicate electro...
متن کاملMechanical performances of elastomers used in diffusers
The use of elastomeric diffusers (EDs) has grown together with the expansion of home care. In these devices, the fill volume of the drug reservoir and the flow rate are preset and cannot be modified. The elastomer, which makes up the reservoir walls, is what makes the infusate flow due to the pressure it exerts. The purpose of this work was to quantify, under standardized experimental condition...
متن کاملModelling Friction and Abrasive Wear of Elastomers
In order to properly model the friction and wear of elastomer materials, it is essential to understand some specific mechanical and tribological features. Mechanical characteristics of elastomer materials are different from those of metals and other relatively hard materials. Elastomers can bear large deformations, the stress-strain curves are non-linear, time and temperature dependent. When th...
متن کاملThermo-mechanical Forming of Al–Mg–Si Alloys: Modeling and Experiments
Abstract. In an ongoing quest to realize lighter vehicles with improved fuel efficiency, deformation characteristics of the material AA 6016 is investigated. In the first part of this study, material behavior of Al–Mg–Si sheet alloy is investigated under different process (temperature and strain rate) and loading (uniaxial and biaxial) conditions experimentally. Later, warm cylindrical cup deep...
متن کاملMechanical response of smectic-C elastomers.
The elastic response of a smectic-C elastomer to three deformations, namely imposed lambda(xx), lambda(xz), and lambda(zz), has been modeled using a nonlinear theory of a nematic elastomer with embedded smectic layers, and with the director tilt (in the x direction) at a fixed angle with respect to the smectic layer normal (z direction). The main focus is the elastic response after any soft mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
سال: 2014
ISSN: 0044-2267
DOI: 10.1002/zamm.201400110