Thermoelectric Generator Based on CuSO4 and Na2SiO3
نویسندگان
چکیده
منابع مشابه
Load Frequency Control Based on Improved Fuzzy Controller in the Microgrid with Thermoelectric Generator
The Microgrid is a small-scale controlled power system, which can be used in islanded mode or in a grid-connected one to provide power. In the islanded Microgrid, the system frequency will be affected severely by the smallest disturbance which can happen due to light inertia in the system. In the independent Microgrid, several generation sources such as solar, wind, and so on can be considered....
متن کاملFlexible Micro Thermoelectric Generator based on Electroplated Bi2Te3
We present and discuss the fabrication process and the performance of a flexible micro thermoelectric generator with electroplated Bi2+xTe3-x thermocouples in a SU-8 mold. Demonstrator devices generate 278μWcm at ∆Tmeas=40K across the experimental set up. Based on model calculations, a temperature difference of ∆TG=21.4K across the generator is assumed. Due to the flexible design and the chosen...
متن کاملRefraction-Assisted Solar Thermoelectric Generator based on Phase-Change Lens
Solar thermoelectric generators (STEGs), which are used for various applications, (particularly small size electronic devices), have optical concentration systems for high energy conversion efficiency. In this study, a refraction-assisted STEG (R-STEG) is designed based on phase-change materials. As the phase-change material (PCM) changes phase from solid to liquid, its refractive index and tra...
متن کاملScreen printed flexible Bi2Te3-Sb2Te3 based thermoelectric generator
This paper reports the fabrication and testing of Bismuth Tellurium (Bi2Te3) – Antimony Tellurium (Sb2Te3) based thermocouples using screen printing technology. In this study, screen printable thermoelectric pastes were developed and the transport properties of cured material were measured. The dimension of each planer thermoleg is 39.3 mm × 3 mm with a thickness of 67 μm for Bi2Te3 leg and 62 ...
متن کاملThe Effect of Aperture Size on the Cavity Performance of Solar Thermoelectric Generator
In this manuscript, a solar cavity packed with thermoelectric generator modules is investigated numerically. The hot plate of TEG modules make the inner surface of the cube, and the cold plate is outside of the cavity, under natural convection. The TEG modules are electrically in series. The solution algorithm using the equations of heat transfer and generated power of TEG modules is d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings
سال: 2020
ISSN: 2504-3900
DOI: 10.3390/proceedings2020063035