Thermomechanical analysis of polymeric foams subjected to cyclic loading: Anelasticity, self-heating and strain-induced crystallization
نویسندگان
چکیده
منابع مشابه
Concrete Filled Tubular Bracing Subjected to Cyclic Loading
The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...
متن کاملNondestructive Evaluation of Strain-Induced Phase Transformation and Damage Accumulation in Austenitic Stainless Steel Subjected to Cyclic Loading
Strain-induced phase transformation and damage accumulation in austenitic stainless steel subjected to cyclic loading were investigated by nondestructive evaluation. The cyclic loading test was performed at various strain amplitudes at the same strain rate. The volume fraction of the strain-induced phase transformation (α′-martensite) was determined by ferrite scope and magnetic coercivity meas...
متن کاملSelf-Sensing of Damage Progression in Unidirectional Multiscale Hierarchical Composites Subjected to Cyclic Tensile Loading
The electrical sensitivity of glass fiber/multiwall carbon nanotube/vinyl ester hierarchical composites containing a tailored electrically-percolated network to self-sense accumulation of structural damage when subjected to cyclic tensile loading-unloading is investigated. The hierarchical composites were designed to contain two architectures differentiated by the location of the multiwall carb...
متن کاملReinforced Concrete Bridge Piers Subjected to Reversed Cyclic Loading
Sixteen large-scale reinforced concrete specimens without web reinforcements were tested to study the behavior of typical bridge piers subjected to deflection reversals that were large enough to cause extensive yielding of the longitudinal reinforcement. The different parameters considered included shear spanto-depth ratio, percentage of longitudinal reinforcement, frequency of the applied load...
متن کاملStrain rate sensitivity of skin tissue under thermomechanical loading.
There have been limited studies addressing the thermally dependent mechanical properties of skin tissue, although this can contribute to a variety of medical applications. To address this, an experimental study on the tensile behaviour of pig skin tissue under different thermal loading conditions and different mechanical stretching rates was performed. The results indicate that there is a signi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer
سال: 2017
ISSN: 0032-3861
DOI: 10.1016/j.polymer.2017.08.010