Thermomechanical evolution of a microstructure

Microstructure Evolution during Electric Current Induced Thermomechanical Fatigue of Interconnects

We demonstrate the evolution of microstructure and deformation associated with the use of electrical methods for evaluating mechanical reliability of patterned interconnects on rigid substrates. Thermomechanical fatigue in aluminum and copper interconnects was induced by means of low frequency (100 Hz), high density (> 10 MA/cm) alternating currents, which caused cyclic Joule heating and associ...

Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel

Duplex stainless steels (DSSS) have a microstructure composed of ferrite and austenite phases that gives them a very good combination of mechanical and corrosion properties. These steels are desirable for many applications in the chemical and petrochemical industries. In the present study, a type of stainless steel was cast, solution annealed at 1200°C for 60 min and then quenched in water. Ini...

Evolution of Microstructure

Evolution of Microstructure: An Example

Evolution of Microstructure in Porous

We study the ow of two immiscible uids of diierent density and mobility in a porous medium. If the heavier phase lies above the lighter one, the interface is observed to be unstable. The two phases start to mix on a mesoscopic scale and the mixing zone grows in time | an example of evolution of microstructure. A simple set of assumptions on the physics of this two{phase ow in a porous medium le...