Thick Film Laser Sintering: An Evidence for Two-step Process
نویسندگان
چکیده
منابع مشابه
Laser sintering of thick-film conductors for microelectronic applications
This paper investigates fabrication of functional thick metal films using simultaneous laser sintering and patterning along with the fundamental physical phenomena that govern the laser sintering process. The effects of the processing parameters on the quality of the fabricated components are investigated through a heat transfer analysis. We show that our process has potentials for metallizatio...
متن کاملThick-film Lithography Using Laser Write
Major part of this work was carried out in Hsinchu. ABSTRACT Mask-making process using laser direct-write has been broadly applied in the microelectronics and the PC board industries. In this paper, we report the thick-film lithography of laser write mainly for the x-ray mask in the LIGA application. Several schemes of multiple writing are successfully demonstrated in terms of the sidewall stra...
متن کاملTwin-step-related growth phenomena of thick diamond film
A thick diamond film prepared by glow discharge plasma assisted chemical vapor deposition (CVD) was investigated by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The degeneration of the {111} faces into three {110} faces was found to be widespread. Both the {110} and {100} faces grow via a step mechanism, with the steps generally originating from the re-entrant corner ...
متن کاملA novel method for laser forming of two-step bending of a dome shaped part
In recent decades, one of the challenges in sheet metal forming was production of two-step bending surfaces without mechanical tools and external force or by a combination of heat source and mechanical tools. Forming with a heat source such as laser beam has the potential for forming arbitrary 3D shapes such as two-step bending surfaces. In this paper a novel method for laser forming of complic...
متن کاملLOW-TEMPERATURE SINTERING OF HIGH VOLTAGE GRADIENT ZnO-BASED THICK FILM VARISTORS
High voltage gradient ZnO-based thick film varistors were fabricated by low-temperature sintering. The effect of sintering temperature on electrical properties of thick film varistors was investigated. The voltage gradient of thick film varistors increased significantly to 3159.4 V/mm after sintering at 725°C for 30 min. The small average grain size with good grain boundaries was the origin for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Crystallography Journal
سال: 2013
ISSN: 1874-8465
DOI: 10.2174/1874846501306010001