Thinning Process of Recast Layer in Hole Drilling and Trimming by EDM
نویسندگان
چکیده
منابع مشابه
effect of the micro wire-edm process parameters on the recast layer in the molybdenum micromachining
the micro wire electrical discharge machining (micro wire-edm) process is a modern machining process with various applications in manufacturing micro-parts. the recast layer remaining on the machined surfaces is an inevitable complication of this process. this layer can subsequently affect the machined parts performance. to optimize the recast layer in the micro wire-edm of the molybdenum micro...
متن کاملA Fast Inspection of Tool Electrode and Drilling Depth in EDM Drilling by Detection Line Algorithm
The purpose of this study was to develop a novel measurement method using a machine vision system. Besides using image processing techniques, the proposed system employs a detection line algorithm that detects the tool electrode length and drilling depth of a workpiece accurately and effectively. Different boundaries of areas on the tool electrode are defined: a baseline between base and normal...
متن کاملTaguchi method and Pareto ANOVA: An approach for process parameters optimization in micro-EDM drilling
Technological advances have facilitated many developments in the MEMS, electrical, medical and aerospace industries in recent years. As the devices commonly found in these industries have become smaller, so the requirements for high-precision machining techniques have become ever more pressing. Nowadays, micro-machining processes are playing an important role in satisfying these requirements. A...
متن کاملpragmatic transfer in compliment responses and chastisements by iranian learners of english
فرهنگ های گوناگون دریافت ها و تعبیر های مختلفی از تناسب و ادب دارند. بنابراین، ارتباط میان فرهنگی خطرات ذاتی خطای ارتباطی را نشان می دهد. این پژوهش به منظور تعیین وقوع انتقال منظورشناختی زبان در زبان بینابینی زبان آموزان ایرانی، اختلاف منظورشناختی زبان را بین فارسی و انگلیسی در کنش های کلامی پاسخ تحسین و انتقاد بررسی می کند.داده ها از میان 33 آمریکایی انگلیسی زبان، 85 زبان آموز ایرانی در سطوح م...
15 صفحه اولMonitoring a deep hole drilling process by nonlinear time series modeling
Deep hole drilling methods are used for producing holes with a high length-to-diameter ratio, good surface finish and straightness. The process is subject to dynamic disturbances that is classified as either chatter vibration or spiralling. In this work, nonlinear time series modeling is used to setup an on-line modeling approach of the time varying dynamics of the process. An on-line monitorin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2016
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.02.262