Third body modeling in fretting using the combined finite-discrete element method
نویسندگان
چکیده
منابع مشابه
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Blast Simulation in Underground Mines Using the Combined Finite-Discrete Element Method
The purpose of this paper is to investigate the application of a combined finite-discrete element program, such as ELFEN, for the simulation and prediction of backfill stope failure risks due to blast loading effects in underground mines. A real size of a backfilled stope blasted in the nearby rock of the paste fill is modelled. The dynamic fracture propagation and fragmentation in rock and the...
متن کاملmodeling of different subsoiler tines performance using discrete element method
for designing tillage implements it would be better to estimate soil forces exerted to the implements. many researches showed that numerical method of discrete element method (dem) is the cheapest and fastest technique for modeling granular material such as soil and especially sandy soil. in this study, paraplow and bentleg tines performance was compared with conventional tine using experimenta...
متن کاملExtended Finite Element Method for Fretting Fatigue Crack Propagation
In this paper, the extended finite element method (X-FEM) is considered for the analysis of fretting fatigue problems. A two-dimensional implementation of the XFEM is carried out within the finite element software ABAQUS by means of user subroutines, and crack propagation in fretting fatigue problems is investigated. On utilizing the non-linear contact capabilities of this code, the numerical t...
متن کاملA Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2014
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2013.12.036