Thixotropic pumping in a cylindrical pipe
نویسندگان
چکیده
منابع مشابه
Slug genesis in cylindrical pipe flow
Transition to uniform turbulence in cylindrical pipe flow occurs experimentally via the spatial expansion of isolated coherent structures called ‘slugs’, triggered by localised finite-amplitude disturbances. We study this process numerically by examining the preferred route in phase space through which a critical disturbance initiates a ‘slug’. This entails first identifying the relative attrac...
متن کاملPipe flow of pumping wet shotcrete based on lubrication layer
Wet shotcrete can reduce dust and improve supporting strength, however, safe and efficient pipage is a key technical part of wet shotcrete process. The paper studied the pipe flow law of wet shotcrete based on lubrication layer by build the experimental pumping circuit of wet shotcrete that can carry out a number of full-scale pumping tests. The experimental results show there was a linear rela...
متن کاملSteady State Operation of Cylindrical Loop Heat Pipe Evaporators
Loop heat pipe evaporators operating under steady state conditions were numerically investigated to describe evaporator characteristics and evaluate evaporator performance. Numerical solutions were obtained for conjugate flow and heat transfer in primary evaporator components. Two geometrical configurations used for cylindrical LHP evaporators, a non-bayonet evaporator and a bayonet evaporator,...
متن کاملResearch on Three-point Centering Device of Cylindrical Drill Pipe
In the process of tightening up and screwing off the iron roughneck, it is required that the center of clamping pliers and the center of drill pipe are coincident, so as to avoid the damage of the circular guide in clamping system, and to ensure the iron roughneck work normally. While the traditional method of centering is artificial in iron roughneck, its precision is low, so it is easy to dam...
متن کاملA Simple Model for Axial Displacement in a Cylindrical Pipe With Internal Shock Loading
This paper describes a simplified model for predicting the axial displacement, stress, and strain in pipes subjected to internal shock waves. This model involves the neglect of radial and rotary inertia of the pipe, so its predictions represent the spatially averaged or low-pass–filtered response of the tube. The simplified model is developed first by application of the physical principles of c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Fluids
سال: 2020
ISSN: 2469-990X
DOI: 10.1103/physrevfluids.5.013303