Three- and four-point bending tests on artificial frozen soil samples at temperatures close to 0 °C
نویسندگان
چکیده
منابع مشابه
Comparison between Three-point and Four-point Flexural Tests
COMPARISON BETWEEN THREE-POINT AND FOUR-POINT FLEXURAL TESTS 2 TO DETERMINE WOOD STRENGTH OF EUCALYPTUS SPECIMENS 3 Paulo Ricardo Gherardi HEIN*, Loïc BRANCHERIAU 4 *Corresponding author: [email protected] 5 Received: September 21, 2016 6 Accepted: January 24, 2018 7 Posted online: January 25, 2018 8 9 ABSTRACT 10 11 Comparison between flexural wood strength values obtained from three-poin...
متن کاملExperimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests
In this study static and fatigue behaviours of honeycomb sandwich composites, made of aramide fibres and aluminium cores, are investigated through four-point bending tests. Damage and failure modes are reported and discussed. Global and local parameters were considered to evaluate the fatigue life of the analysed sandwich composites. Effects of core densities and the cell orientation (L or W) o...
متن کاملElastic modulus of a triple-stranded stainless steel arch wire via three- and four-point bending.
The modulus of elasticity (E) was determined in simple three- and four-point bending for an 0.0175" (3 X 0.008") stainless steel arch wire. Using variable light loads (10-160 g) to limit the elastic deflection of a wire to less than 5% of its beam length, the force-deflection profiles were determined for three nominal span lengths (L = 0.35", 0.75", and 1.00") in three-point bending and three n...
متن کاملStatement of Contribution Close-point Spatial Tests and Their Application to Random Number Generators Close-point Spatial Tests and Their Application to Random Number Generators
Statement Ideally, a random number generator used for a given simulation problem should pass statistical tests closely related to that problem. But tailoring special tests for each problem is impractical. General purpose generators must then be submitted to a wide range of varied statistical tests, sensitive to diierent types of defects in the generator. In this article, we study statistical te...
متن کاملThree-Point Bending Tests of Zirconia Core/Veneer Ceramics for Dental Restorations
Introduction. The mechanical strength and the surface hardness of commercially available yttrium-doped zirconia were investigated. Furthermore, a comparative study of eight different ceramic veneers, to be used for the production of two-layered all-ceramic restorative systems, was carried out. Materials and Methods. Four types of zirconia specimens were analyzed, according to a standard ISO pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Cold Regions Science and Technology
سال: 2017
ISSN: 0165-232X
DOI: 10.1016/j.coldregions.2016.11.003