Three-dimensional suction flow control and suction jet length optimization of NACA 0012 wing
نویسندگان
چکیده
منابع مشابه
optimization of suction jet length on naca 0012 airfoil with using of reynolds stress model (rsm)
in this study, the effect of suction and the parameters such as suction amplitude, suction coefficient and suction jet length on naca0012 was evaluated. the turbulence employed model was the rsm model. suction jet is located in 10% of the chord length. the range of suction jet entrance velocity was selected from 0.1 to 0.5 of freestream velocity. the maximum increase in lift to drag ratio was s...
متن کاملTurbulent characteristics in flow subjected to bed suction and jet injection as a pier-scour countermeasure
The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...
متن کاملInvestigation of suction for laminar flow control of three-dimensional boundary layers
Direct numerical simulations are employed to investigate the effects of discrete suction orifices at the wall on the disturbance evolution in laminar three-dimensional boundary-layer flows with favourable pressure gradient. Suction panels with many suction orifices can excite unstable crossflow (CF) modes even if the orifice spacing is smaller than the chordwise/spanwise wavelengths of unstable...
متن کاملAdvanced Laminar Flow Control on a Swept Wing: Useful Crossflow Vortices and Suction (Invited)
Results of high-order direct numerical simulations are summarized for the evolution of crossflow disturbances in incompressible wing-generic boundary-layers with suction at the wall. The concept of smart suction, an adapted combination of the upstream-flow-deformation (UFD) technique and suction, is presented for laminar flow control. In the UFD technique, relatively tightly spaced, useful cros...
متن کاملDirect Numerical Simulation of Swept-Wing Laminar Flow Control Using Pinpoint Suction
Recent investigations of laminar flow control for swept-wing boundarylayer flows provide promising results with respect to crossflow-transition delay using a technique called pinpoint suction. Strong, localized suction through holes accurately positioned with respect to the crossflow-vortex position can directly weaken the growth of secondary instabilities that are responsible for the final lam...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Meccanica
سال: 2015
ISSN: 0025-6455,1572-9648
DOI: 10.1007/s11012-015-0100-9