Three-point tensile test method to evaluate Young's moduli of thin films.
نویسندگان
چکیده
منابع مشابه
architecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولHigh-temperature tensile behavior of freestanding Au thin films
The mechanical behavior of freestanding thin sputter-deposited films of Au is studied at temperatures up to 340°C using tensile testing. Films tested at elevated temperatures exhibit a significant decrease in flow stress and stiffness. Furthermore the flow stress decreases with decreasing film thickness, contravening the usual notion that “smaller is stronger”. This behavior is attributed mainl...
متن کاملAn Electrical Method for Measuring Fatigue and Tensile Properties of Thin Films on Substrates
A novel approach for measuring thermal fatigue lifetime and ultimate strength of patterned thin films on substrates is presented. The method is based on controlled application of cyclic joule heating by means of low-frequency, high-density alternating current. Such conditions preclude electromigration, but cause cyclic strains due to mismatch in coefficients of thermal expansion between film an...
متن کاملTensile behavior of Al1 xMox crystalline and amorphous thin films
The exceptional strength and distinct deformation physics exhibited by pure ultrafine-grained and nanocrystalline metals in comparison to their microcrystalline counterparts have been ascribed to the dominant influence of grain boundaries in accommodating plastic flow. Such grain-boundary-mediated mechanisms can be augmented by additional strengthening in nanocrystalline alloys via solute and p...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1991
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.57.686