THREE SURFACE CYCLIC PLASTICITY MODEL FOR FEM ANALYSIS OF STEEL BRIDGE PIERS SUBJECTED TO SEISMIC LOADING
نویسندگان
چکیده
منابع مشابه
Reinforced Concrete Bridge Piers Subjected to Reversed Cyclic Loading
Sixteen large-scale reinforced concrete specimens without web reinforcements were tested to study the behavior of typical bridge piers subjected to deflection reversals that were large enough to cause extensive yielding of the longitudinal reinforcement. The different parameters considered included shear spanto-depth ratio, percentage of longitudinal reinforcement, frequency of the applied load...
متن کاملSeismic Design of Concrete-Filled Circular Steel Bridge Piers
The adequacy of the existing design provisions for concrete-filled steel pipes subjected to axial forces and flexure is reviewed by comparing the strengths predicted by the CAN/CSA-S16.1-M94, AISC LRFD 1994, and the Eurocode 4 1994 codes and standards against experimental data from a number of investigators. New proposed design equations are then developed, in a format compatible with North Ame...
متن کاملBi-directional Seismic Analysis and Design of Bridge Steel Truss Piers Allowing a Controlled Rocking Response
4-legged bridge steel truss piers provide support for gravity, transverse, and longitudinal lateral loads of bridges. Allowing a controlled rocking response for seismic resistance of 4-legged truss piers requires the development of design equations considering ground motions in two horizontal directions and vertical excitation. First, the static kinematic and hysteretic bi-directional behavior ...
متن کاملDynamic Analysis of Multihazard-Resistant Bridge Piers Having Concrete-Filled Steel Tube under Blast Loading
Research was conducted to analytically investigate the blast-response and behavior of multihazard-resistant bridge piers having circular-shaped, concrete-filled steel tube (CFST) columns. Two different analysis methods, namely a single-degree-of-freedom (SDOF) dynamic analysis and a fiber-based dynamic analysis, were used for this purpose and calibrated with the maximum residual deformations ob...
متن کاملSeismic Retrofit of Bridge Steel Truss Piers Using a Controlled Rocking Approach
This paper investigates a seismic retrofit technique that allows bridge steel truss piers to uplift and rock on their foundation. Displacement-based passive energy dissipation devices buckling-restrained braces, or BRBs are implemented at the uplifting location to control the rocking response while providing additional energy dissipation. The hysteretic behavior of the controlled rocking system...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1998
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1998.591_189