Throwing Powers of Various Nickel Plating Baths
نویسندگان
چکیده
منابع مشابه
Prolonging the Life of Electroless Nickel Plating Baths by Phosphite Removal
Electroless nickel plating baths have to be discarded when levels of phosphites build up and interfere with the plating process. OWMC funded research conducted at ORTECH International to determine whether phosphites could be removed from plating bath solution. The first attempt to do this by adsorption on flyash was unsuccessful. However, the use of calcium ion to precipitate calcium phosphite ...
متن کاملNickel Plating and Electroforming
The material presented in this publication has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Development Institute, its members, staff and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of a...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملData-Based Modeling of Electroless Nickel Plating
This work connects the neocybernetic theory of elastic systems to modeling of a complex industrial process. It turns out that using simple mathematics combined with multilinear tools leads to linear models that can be used for monitoring and control. As an application example, electroless nickel plating is studied.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1970
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.21.286