TiC Coating on Carbon Steel Using Pb-Ti Melt
نویسندگان
چکیده
منابع مشابه
Ti-TiC-TiC/DLC gradient nano-composite film on a biomedical NiTi alloy.
Ti-TiC-TiC/diamond-like carbon (DLC) gradient nano-composite films have been prepared on NiTi alloy substrates by the technique of plasma immersion ion implantation and deposition (PIIID) combined with plasma-enhanced chemical vapor deposition (PECVD). The influence of negative bias voltage applied to the substrate (from -100 V to -500 V) on the chemical structure, microstructure, mechanical pr...
متن کاملCopper coating of carbon steel by a furnace brazing process using brass as the braze
A ship building grade of carbon steel has been coated with copper by a furnace brazing process starting from a brass braze. An argon protective atmosphere was used to prevent oxidation of the steel. However, when the deposit was produced a low gas flow rate ensured that zinc was lost from the brass by oxidation leaving a copper deposit on the steel surface. The copper was found to be zinc free ...
متن کاملTitanium-Aluminum Oxide Coating on Aluminized Steel
In this study, a plasma electrolytic oxidation (PEO) process was used to form titanium-aluminum oxide coating on aluminized steel. The present work was mainly to study the effects of treatment time of PEO process on properties of the titanium coating. A potentiodynamic polarization corrosion test was employed to investigate the corrosion resistance of the coating. The friction coefficient and w...
متن کاملFabrication of Nanodiamond Coating on Steel
The hardness, heat conductivity and low friction coefficient of microcrystalline diamond make it a suitable candidate for tribological applications. However, its roughness and high deposition temperature pose significant obstacles to these applications. We have successfully grown nanocrystalline diamond on steel at 400 °C by hot-filament chemical vapor deposition by employing a CrN interfacial ...
متن کاملMechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel
Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1993
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.57.5_538