Tilt Compensation of Externally Pressurized Thrust Gas-Bearing with a Flow Control Ring.
نویسندگان
چکیده
منابع مشابه
μ Control of a High Speed Spindle Thrust Magnetic Bearing
Experimental results demonstrate that μ synthesis provides an excellent tool for increasing the dynamic stiffness of thrust magnetic thrust bearings. Accurate system modeling and appropriate uncertainty descriptions are critical to obtaining such results and are described in detail. Both complex μ and mixed μ synthesis were used to design controllers. The performance of the μ controllers is com...
متن کاملA study on the characteristics of externally pressurized air bearings
In this study the direct numerical method is applied to solve the perturbed Reynolds" equation. To solve it the perturbed dimensionless mass f low rate is used as the boundary condition under the inherently compensated restrictor. The dynamic characteristics of a rotor supported in the externally pressurized air bearings, such as stiffness and damping coefficients, are analyzed, and as a result...
متن کاملDevelopment of a Compact Axial Active Magnetic Bearing with a Function of Two-Tilt-Motion Control
A compact axial active magnetic bearing with a function of two-tilt-motion control is fabricated which has a new configuration of magnetic poles. They consist of four cylindrical poles with coils and a single common pole whose opposite plane of the rotor has a permanent magnet to achieve multi-degree-of-freedom zero power control. Modal control is applied because local zero power control may ma...
متن کاملSensing – Magnetic Compass with Tilt Compensation
Introduction ....................................................................... 1 Magnetic Compass Background ....................................... 1 Device Design Basis ......................................................... 3 PSoC Implementation ........................................................ 5 Software Description ......................................................... 6 ...
متن کاملThrust Vectoring Control of Supersonic Flow Through an Orifice Injector
Traditional mechanical control systems in thrust vectoring are efficient in rocket thrust guidance but their costs and their weights are excessive. The fluidic injection in the nozzle divergent constitutes an alternative procedure to achieve the goal. In this paper, we present a 3D analytical model for fluidic injection in a supersonic nozzle integrating an orifice. The fluidic vectoring uses a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2000
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.66.972