TiNi Alloy Lattice Structures with Negative Poisson’s Ratio: Computer Simulation and Experimental Results
نویسندگان
چکیده
One of the issues that modern implants face is their high stiffness, coupled with a positive Poisson’s ratio along implant. This creates certain problems bone inflammation and implant detachment. A possible solution to these TiNi alloy lattice structure low stiffness negative ratio. paper presents results simulation, fabrication by SLM technique, study structures ratio, which can help solve said problems. The studies involve determination mechanical characteristics, transformation temperatures, potential for superelasticity effect structure. characteristics obtained at initial simulation were partially confirmed in course works. Moreover, possibility fabricating (about −0.00323) Young’s modulus values (0.818 GPa) was technique.
منابع مشابه
Deformation Properties of TiNi Shape Memory Alloy
In order to describe the deformation properties due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy, a thermomechanical constitutive equation considering the volume fractions of induced phases associated with both transformations is developed. The proposed constitutive equation expresses well the properties of the shape memory effect, pseudoelasticity...
متن کاملThermomechanical Properties of TiNi Shape Memory Alloy
The thermomechanical properties of shape memory effect and superelasticity due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy were investigated experimentally. The transformation line, recovery stress and fatigue property due to both transformations were discussed for cyclic deformation. The thermomechanical properties due to the R-phase transformati...
متن کاملBehavior Simulation Polyamide 6 (PA6) During Friction Stir Welding and Comparison with Experimental Results
In this study, the effects of linear speed and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution of heat,the material flow and weld defect formation of the Polyamide 6 (PA6) workpiece. The commercial CFD Fluent 6.4 software package was used to the simulation of the process with computational fluid dynamic technique. The output results of...
متن کاملCOMPUTER SIMULATION OF THE LIQUID Li4Pb ALLOY
We present a computer simulation of the partially ionic liquid alloy Li4Pb at 1085K. The calculation is based on the pairwise potentials used by Copestake et al, to describe the structure of this system: screened Coulomb interact ions plus a soft core repulsion. Diffusion coefficients and static and dynamical structure functions are evaluated and compared with experimental results. Pair correla...
متن کاملBehavior Simulation Polyamide 6 (PA6) During Friction Stir Welding and Comparison with Experimental Results
In this study, the effects of linear speed and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution of heat,the material flow and weld defect formation of the Polyamide 6 (PA6) workpiece. The commercial CFD Fluent 6.4 software package was used to the simulation of the process with computational fluid dynamic technique. The output results of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2022
ISSN: ['2075-4701']
DOI: https://doi.org/10.3390/met12091476