Tools with rotary cutting edges – classification and terminology
نویسندگان
چکیده
منابع مشابه
Processing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...
متن کاملTools for Terminology Processing
Automatic terminology processing appeared 10 years ago when electronic corpora became widely available. Such processing may be statistically or linguistically based and produces terminology resources that can be used in a number of applications : indexing, information retrieval, technology watch, etc. We present the tools that have been developed in the IRIN Institute. They all take as input te...
متن کاملThe Forming Theory and Computer Simulation of the Rotary Cutting Tools with Helical Teeth and Complex Surfaces
Huran Liu Department of Mechanical Engineering Zhejiang University of Science and Technology Hangzhou 310023, China Abstract This paper researched the forming theory of the cutting tools with helical teeth and complex surfaces. Deduced the nonlinear equations of the movement of NC system to generate such tools, presented the way to find the solution of the equations, calculated the cross sectio...
متن کاملComparison of Cutting Ceramics with Hard Metal Cutting Tools
Cutting ceramic tools are used especially at high cutting speeds in the machining process. The highly brittle type of structure and the tendency for cleavage (crack formation) are the infavorable properties of these materials, which keep their hardness at high temperatures. The hard metals are produced by sintering of the carbides such as whisker WC, TiC and TaC with the presence of Co as a bin...
متن کاملNew Diamond Grinding Wheels with Electrically Conductive Cutting Edges
The application of an electrically conductive diamond material to a new type of grinding wheel whose cutting edges possess electrical conductivity has been tried in this research work. Firstly, electrical discharge machining is applied on a solid surface of an electrically conductive CVD diamond film to create protrusions like cutting edges. Secondly, it is confirmed that the EDMed surface of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanik
سال: 2017
ISSN: 0025-6552
DOI: 10.17814/mechanik.2017.8-9.100