Toughening Mechanisms of Discontinuous Fiber Reinforced Ceramics.
نویسندگان
چکیده
منابع مشابه
Strengthening of Fiber-reinforced Self-healing Ceramics
ID No: FC-169 ABSTRACT The continuous fiber reinforced self-healing ceramic composites (shFRC) were proposed as one of the candidate materials for turbine blade [1]. The shFRC consists of three components, which are oxide fiber bundle, oxide matrix and self-healing agent interlayer. As the self-healing is generated at only the interlayer, it is necessary that crack propagation is led into the i...
متن کاملDiscontinuous fiber-reinforced composites above critical length.
Micromechanical physics of critical fiber length, describing a minimum filament distance for resin impregnation and stress transfer, has not yet been applied in dental science. As a test of the hypothesis that 9-micron-diameter, 3-mm-long quartz fibers would increase mechanical strength over particulate-filled composites, photocure-resin-pre-impregnated discontinuous reinforcement was incorpora...
متن کاملToughening Mechanisms in Nanolayered MAX Phase Ceramics—A Review
Advanced engineering and functional ceramics are sensitive to damage cracks, which delay the wide applications of these materials in various fields. Ceramic composites with enhanced fracture toughness may trigger a paradigm for design and application of the brittle components. This paper reviews the toughening mechanisms for the nanolayered MAX phase ceramics. The main toughening mechanisms for...
متن کاملThe Effect of Fiber Orientation on the Toughening of Short Fiber-Reinforced Polymers
The effect of fiber orientation on the toughening of polymers by short glass fibers generally below their critical length was investigated using specimens with either well-aligned or randomly oriented fibers. The fibers were aligned by an electric field in a photopolymerizable monomer, which was polymerized while the field was still being applied. These materials were fractured with the aligned...
متن کاملDevelopment of Al2O3 fiber-reinforced Al2O3-based ceramics.
The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infilt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 1999
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.38.416