Tracking control of parallel manipulator with 3-DOF
نویسندگان
چکیده
منابع مشابه
Tracking control of parallel manipulator with 3-DOF
A parallel three degrees of freedom (3-DOF) manipulator known as Maryland manipulator is considered in this paper. The manipulator model considered in this paper is more practical because the offset lengths are not taken zero. The trajectory tracking control of the Maryland manipulator is done using linear–quadratic regulator (LQR) based proportional–integral–derivative (PID) controller. Three ...
متن کاملPosition Control of a 3 - DOF 3 - RRR Planar Parallel Manipulator Using Model Predictive Control
This paper presents the position control of a 3-DOF 3-RRR planar parallel manipulator by using the model predictive control. Not only the numerical simulations are demonstrated but also an experimental hardware-in-the-loop system is constructed. The experimental results are used to verify the simulation results. The entire system is designed as a semi-closed loop system. The manipulator is driv...
متن کاملStatic Error Free Tracking Control Based on Linear Quadratic Regulator of 3-DOF Parallel Manipulator with Redundant Actuation
Parallel manipulators have advantages such as high stiffness, low moving inertia, high payload capability, and high accuracy. In this paper, the servo drive system of valve controlled asymmetrical hydraulic cylinder is designed for 4SPS/S parallel manipulator with redundant actuator. A unified nonlinear model suitable for forward and inverse motion is deduced for the valve controlled asymmetric...
متن کاملMechatronic design of a 3-DOF parallel translational manipulator
This paper presents the development steps of a fast manipulator, up to the building of the experimental device, in a context of mechatronic design which implies the integration of several engineering disciplines. High performance of the manipulator has been achieved by means of the suitable integration of the mechanical part and the drive part. For the mechanical part we choose a 3-dof parallel...
متن کاملDesign Optimization of a 3 DOF Translational Parallel Manipulator
This paper presents an optimal kinematic design of a 3PRC (prismatic-revolute-cylindrical) spatial translational parallel manipulator with inclined actuator arrangement by formulating a multi-objective optimization problem. Three performance criteria’s namely Global Conditioning Index (GCI), Global stiffness Index (GSI) and Workspace volume are considered as the objective functions. A multi-obj...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Advanced Technology and Engineering Exploration
سال: 2016
ISSN: 2394-5443,2394-7454
DOI: 10.19101/ijatee.2016.323002