Transducer Design Including Beam Steering and Diffraction
نویسندگان
چکیده
منابع مشابه
Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملBroadband Beam Steering
A solid-state broadband beam deflector is described. This non-mechanical system steers spatially coherent broad band light to a common location in the far field. The components include a liquid crystal grating and achromatic Fourier transformer. The liquid crystal grating employs a polarization modulation scheme which produces a wavelength independent phase shift. The achromatic Fourier transfo...
متن کاملA High Resolution Actuator Design For Laser Beam Steering Applications
An actuator design for beam steering micromirrors is reported. Coarse positioning is achieved with a 4-bit mechanical digital to analog converter [1]. The exact position is sensed by a set of lateral comb fingers and controlled through the leastsignificant bit of the DAC, which is embedded in a feedback loop. The actuator is designed for bilateral actuation of +/3μm with a resolution of 6nm pro...
متن کاملDesign of Controlled RF Switch for Beam Steering Antenna Array
A printed dipole antenna integrated with a duplex RF switch used for mobile base station antenna beam steering is presented. A coplanar waveguide to coplanar strip transition was adopted to feed the printed dipole. A novel RF switch circuit, used to control the RF signal fed to the dipole antenna and placed directly before the dipole, was proposed. Simulated and measured data for the CWP-to-CPS...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Acoustical Society of America
سال: 1973
ISSN: 0001-4966
DOI: 10.1121/1.1978339