Transformation Sequence Rule of Martensite Plates and Temperature Memory Effect in Shape Memory Alloys
نویسندگان
چکیده
منابع مشابه
Stabilisation of Martensite in Copper Based Shape Memory Alloys
The experimental facts on the stabilisation of martensite in copper base shape memory alloys, of interest to the scientific investigator and the practical alloy processor and user are reported. Factors that have an influence on stabilisation are considered in this respect. The mechanisms proposed in the literature to explain stabilisation are critically examined.
متن کاملTransformation yield surface of shape memory alloys
Shape-memory alloys transform under stress, and this stress-induced transformation is useful for various practical applications. The stress at which the alloy transforms depends on the orientation of the stress relative to the specimen, and may be described using a transformation yield surface. This paper provides early results of a theoretical treatment of the transformation yield surface of s...
متن کاملApplication of Shape Memory Alloys in Seismic Isolation: A Review
In the last two decades, there has been an increasing interest in structural engineering control methods. Shape memory alloys and seismic isolation systems are examples of passive control systems that use of any one alone, effectively improve the seismic performance of the structure. Characteristics such as large strain range without any residual deformation, high damping capacity, excellent re...
متن کاملTRANSFORMATION BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS TREATED BY THERMOMECHANICAL PROCESSING USING DSC
Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...
متن کاملDirect observation of hierarchical nucleation of martensite and size-dependent superelasticity in shape memory alloys.
Martensitic transformation usually creates hierarchical internal structures beyond mere change of the atomic crystal structure. Multi-stage nucleation is thus required, where nucleation (level-1) of the underlying atomic crystal lattice does not have to be immediately followed by the nucleation of higher-order superstructures (level-2 and above), such as polysynthetic laths. Using in situ trans...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Sinica (English Letters)
سال: 2015
ISSN: 1006-7191,2194-1289
DOI: 10.1007/s40195-015-0324-7