Transient heat input model for friction stir welding using non-circular tool pin
نویسندگان
چکیده
منابع مشابه
Effect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin
In friction stir welding frictional heat is generated by the rotating tool, sliding over the stationary plate along the weld centre. Tool being the only source of heat producing member, its geometrical design influences the heat generation rate. In this present work, effects of variation in tool shoulder and tool pin taper angles on thermal history during joining are analysed. Tools with triang...
متن کاملTool Geometry for Friction Stir Welding—Optimum Shoulder Diameter
The most important geometric parameter in the friction stir welding (FSW) tool design is the shoulder diameter, which is currently estimated by trial and error. Here, we report a combined experimental and theoretical investigation on the influence of shoulder diameter on thermal cycles, peak temperatures, power requirements, and torque during FSW of AA7075-T6. An optimum tool shoulder diameter ...
متن کاملDesign of Friction Stir Welding Tool for Avoiding Root Flaws
In order to improve material flow behavior during friction stir welding and avoid root flaws of weld, a tool with a half-screw pin and a tool with a tapered-flute pin are suggested. The effect of flute geometry in tool pins on material flow velocity is investigated by the software ANSYS FLUENT. Numerical simulation results show that high material flow velocity appears near the rotational tool a...
متن کاملMisalignment detection for friction stir welding or Enabling seam tracking for friction stir welding
This paper describes a technique for determining the position of the friction stir welding (FSW) tool with respect to the weld seam during welding. This technique is proposed for online misalignment detection or as a position estimator for in-process tracking of the weld seam for FSW.
متن کاملEffect of Heat Input on Microstructure and Mechanical Properties in Friction Stir Welding of HSLA-60
High-strength low alloy steels are a class of steels used in applications that require high strength and good weldability, including ship hulls, gas pipelines and oil industry. One way to build parts is fusion welding that create areas with a large grain size in the heat-affected zone and increased susceptibility to hydrogen cracking. One way to solve this problem is to use solid state friction...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: FME Transactions
سال: 2020
ISSN: 1451-2092,2406-128X
DOI: 10.5937/fmet2001137l