Transient thermal response with nonlocal radiation of a blast furnace main trough

Blast Furnace Analysis with Neural Networks

Nowadays blast furnace operation is supervised by extensive measurements and controlled accordingly. Characteristic indications concerning process quality are given by the analysis of the radial temperature profile in the upper part of the furnace. Optimising this temperature distribution would lead to considerable savings of input material. To achieve an optimisation, quantitative relations be...

.o Introduction 2.0 Background 3.0 Project Test Plan 4.0 Blast Furnace Operations 4.1 Blast Furnace Operating Conditions 4.2 Blast Furnace Trial Results Using Granular and Pulverized High Volatile Coal 4.3 Furnace Thermal Conditions and Lining Wear

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

On the Thermal Behavior of the Slab in a Reheating Furnace with Radiation

A mathematical heat transfer model for the prediction of transient heating of the slab in a direct-fired walking beam type reheating furnace has been developed by considering the nongray thermal radiation with given furnace environments. The furnace is modeled as radiating nongray medium with carbon dioxide and water with five-zoned gas temperature and the furnace wall is considered as a consta...

Properties of Cement Pastes Doped with Very High Amounts of Ground Granulated Blast-furnace Slag

In the current work, the properties of cement pastes doped with high amounts of ground granulated blast-furnace slag (HVS) were investigated. Portland cement (PC) was substituted with ground granulated blast-furnace slag (donated as slag) at very high amounts of 85%, 90%, 95% and 100%, by weight. PC paste without any content of slag was used as a reference. Some fresh and hardened properties su...