Transistors made in laser recrystallized polysilicon on insulator films
نویسندگان
چکیده
منابع مشابه
Low Temperature Polysilicon Thin-Film Transistors on Flexible Substrates
We fabricated low-temperature polycrystalline silicon thin-film transistors (poly-Si TFTs) on flexible substrates using sputtered amorphous Si (a-Si) precursor films. The a-Si precursor films were deposited by using rf-magnetron sputtering system with argon-helium mixture gas to minimize the argon incorporation into the Si film. The a-Si films were laser annealed by using XeCl excimer laser and...
متن کاملPolysilicon Source-Gated Transistors for Mixed-Signal Systems-on-Panel
The performance benefits of using source-gated transistors (SGTs) in analog large-area electronic circuits are examined practically and via numerical simulations. In current mirror circuits made using thin-film technology, significant advantages are observed for SGT implementations. A comparison of current mirrors implemented with standard field effect transistors (FETs) and SGTs shows that the...
متن کاملHigh-performance polysilicon thin ®lm transistors on steel substrates
We fabricated thin ®lm transistors in polycrystalline silicon on steel substrates. The polycrystalline silicon ®lms were made by thermally annealing hydrogenated amorphous silicon precursor ®lms, which had been deposited on stainless steel coated with 0.5 lm thick 810°C-annealed SiO2. We employed annealing temperatures ranging from 600°C, which is the furnace annealing temperature limit for con...
متن کاملPulsed-laser atom probe tomography of p-type field effect transistors on Si- on-insulator substrates
Related Articles Characterization of enhancement-mode n-channel sulfur-treated InP MOSFET with liquid phase deposition-TiO2 gate oxide J. Vac. Sci. Technol. B 30, 052201 (2012) La2O3 gate insulators prepared by atomic layer deposition: Optimal growth conditions and MgO/La2O3 stacks for improved metal-oxide-semiconductor characteristics J. Vac. Sci. Technol. A 30, 051507 (2012) SnO2-gated AlGaN/...
متن کاملResidual Stress Variation in Polysilicon Thin Films
This paper compares the use of four mechanical methods for characterization of residual stress variation in low pressure chemical vapor deposited (LPCVD) polysilicon thin films deposited, doped, and annealed under different conditions. Stress was determined using buckling structures, vibrating microstructures, static rotating structures and the wafer curvature method. After deposition of 1.0 μm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 1986
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02744151