Transverse bending of rectangular plates with a single-edge crack or double-edge cracks.
نویسندگان
چکیده
منابع مشابه
Buckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load
The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...
متن کاملBuckling of Rectangular Functionally Graded Material Plates under Various Edge Conditions
In the present paper, the buckling problem of rectangular functionally graded (FG) plate with arbitrary edge supports is investigated. The present analysis is based on the classical plate theory (CPT) and large deformation is assumed for deriving stability equations. The plate is subjected to bi-axial compression loading. Mechanical properties of FG plate are assumed to vary continuously along ...
متن کاملEffect of Through Stationary Edge and Center Cracks on Static Buckling Strength of Thin Plates under Uniform Axial Compression
Thin plate structures are more widely used in many engineering applications as one of the structural members. Generally, buckling strength of thin shell structures is the ultimate load carrying capacity of these structures. The presence of cracks in a thin shell structure can considerably affect its load carrying capacity. Hence, in this work, static buckling strength of a thin square plate wit...
متن کاملEdge Crack Studies in Rotating FGM Disks
This article focused on the stress analysis of an edge crack in a thin hallow rotating functionally graded material (FGM) disk. The disk is assumed to be isotropic with exponentially varying elastic modulus in the radial direction. A comprehensive study is carried out for various combinations of the crack length and orientation with the different gradation of materials. The effect of non-unifor...
متن کاملThe effect of the angle upper edge in shaped noise barriers with a T-shaped upper edge
Background and Objective: Efforts to improve the effectiveness of noise barriers have been made, including shape, aesthetics, form and gender. Therefore, the aim of this study was to investigate the effect of the angle upper edge in shaped noise barriers with a T-shaped upper edge. Materials and Methods: A 2D boundary element method (BEM) was used to predict the insertion loss of the tested ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1989
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.55.508