Transverse profile forming for high energy electron beams using 3D-printed plastic samples
نویسندگان
چکیده
The work presents application of previously proposed approach for transverse profile forming high energy electron beams with plastic samples made using 3D printing technology. collimator PLA (polylactide) is designed and produced in a frame this work. results 6 MeV beam clinical linear accelerator Elekta Synergy presented. Obtained comparison data from XiO dosimetry planning system shows good agreement calculated experimentally formed by dose fields.
منابع مشابه
Stable topological insulators achieved using high energy electron beams.
Topological insulators are potentially transformative quantum solids with metallic surface states which have Dirac band structure and are immune to disorder. Ubiquitous charged bulk defects, however, pull the Fermi energy into the bulk bands, denying access to surface charge transport. Here we demonstrate that irradiation with swift (∼2.5 MeV energy) electron beams allows to compensate these de...
متن کاملEvaluation of water equivalency of Plastic WaterTM for high-energy electron beams using IAEA TRS-398 Code of Practice
Introduction. In the International Code of Practice for dosimetry TRS-398 published by International Atomic Energy Agency (IAEA), water is recommended as the reference medium for the determination of absorbed dose for high-energy electron beams. Plastic phantoms may be used under certain circumstances for electron beam dosimetry for beam qualities R50 < 4g/cm2 (E0 below 10 MeV). In our study, w...
متن کاملA M Ller Polarimeter for High Energy Electron Beams
A single arm M ller polarimeter used to measure the longitudinal beam polarization of the 48 GeV electron beam for SLAC xed target experiment E{154 is described. The polarimeter utilizes an array of silicon strip detectors and a dipole magnetic spectrometer to detect M ller scattered electrons from magnetized Fe-Co alloy target foils. The details of the foil polarization measurements and analys...
متن کاملA Toroidal Charge Monitor for High - Energy Picosecond Electron Beams ?
A monitor system suitable for the accurate measurement of the total charge of a 2-ps 28.5 GeV electron beam over a large dynamic range is described. Systematic uncertainties and results on absolute calibration, resolution, and long-term stability are presented.
متن کاملA Mdler polarimeter for high energy electron beams
A single arm Msller polarimeter used to measure the longitudinal beam polarization of the 48GeV electron beam for SLAC fixed target experiment E-154 is described. The polarimeter utilizes an array of silicon strip detectors and a dipole magnetic spectrometer to detect Msller scattered electrons from magnetized Fe-Co alloy target foils. The details of the foil pol~ization measu~ments and analysi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: ['1757-8981', '1757-899X']
DOI: https://doi.org/10.1088/1757-899x/1019/1/012005