Treatment of Real Textile Wastewater Using Electron Beam Irradiation
نویسندگان
چکیده
منابع مشابه
Treatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation
Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...
متن کاملIAEA-CN-115-50 Electron Beam Treatment Plant for Textile Dyeing Wastewater
Abstract. A pilot plant for treating 1,000m of textile dyeing wastewater per day with electron beam has constructed and operated continuously in Daegu, Korea since 1998. This plant is combined with biological treatment system and it shows the reduction of chemical reagent consumption, and also the reduction in retention time with the increase in removal efficiencies of CODCr and BOD5 up to 30~4...
متن کاملTextile Wastewater Treatment Using Sawdust as Adsorbent
The role of sawdust in the removal of pollutants from textile wastewater has been investigated. The textile wastewater was treated by using sawdust as adsorbent and then filtered. The various physicochemical characteristics of sawdust treated and untreated textile effluent were analyzed. The maximum percent removal of 37% was observed for total suspended solids while minimum removal of 9% for c...
متن کاملTextile Dyeing Wastewater Treatment
Textile industry can be classified into three categories viz., cotton, woolen, and synthetic fibers depending upon the used raw materials. The cotton textile industry is one of the oldest industries in China. The textile dyeing industry consumes large quantities of water and produces large volumes of wastewater from different steps in the dyeing and finishing processes. Wastewater from printing...
متن کاملTextile Wastewater Treatment by Electrocoagulation Process using Aluminum Electrodes
Background and purpose: Textile industries are among the most polluting industries regarding the volume and the complexity of treatment of its effluents discharge. This study investigated the efficiency of electrocoagulation process using aluminum electrodes in basic red 18 dye removal from aqueous solutions. Materials and Methods: This study was performed in a bipolar batch reactor with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Chemica Iasi
سال: 2019
ISSN: 2067-2446
DOI: 10.2478/achi-2019-0019