Treatment of sugar industry effluent using an electrocoagulation process: Process optimization using the response surface methodology
نویسندگان
چکیده
منابع مشابه
Roasting Process Optimization of Walnut Kernels for the Preparation of Walnut Cream Using Response Surface Methodology
Roasting has considerable effects on the quality of cream made of nuts. In this study, the roasting conditions of walnut kernels were optimized based on the stability parameters of the produced cream. Temperatures of 100-150°C for 10-30 minutes were used to roast walnut kernels. The amount of oil separation, peroxide, acidity and Thiobarbituric acid values of the cream, as well as color paramet...
متن کاملOptimization of Electrochemical Treatment Process Conditions for Distillery Effluent Using Response Surface Methodology
Distillery industry is recognized as one of the most polluting industries in India with a large amount of annual effluent production. In this present study, the optimization of electrochemical treatment process variables was reported to treat the color and COD of distillery spent wash using Ti/Pt as an anode in a batch mode. Process variables such as pH, current density, electrolysis time, and ...
متن کاملelectrocoagulation of tannery wastewater using monopolar electrodes: process optimization by response surface methodology
in the present study, the treatment of tannery wastewater was performed by electrocoagulationmethod (ec) using aluminium and steel electrodes. response surface methodology (rsm) with three factors; current density (i), electrolysis time (t) and ph, with each factor at five levels, was used to optimize the factors for higher chemical oxygen demand (cod) and total suspended solids (tss) removal. ...
متن کاملelectrocoagulation of tannery wastewater using monopolar electrodes: process optimization by response surface methodology
in the present study, the treatment of tannery wastewater was performed by electrocoagulationmethod (ec) using aluminium and steel electrodes. response surface methodology (rsm) with three factors; current density (i), electrolysis time (t) and ph, with each factor at five levels, was used to optimize the factors for higher chemical oxygen demand (cod) and total suspended solids (tss) removal. ...
متن کاملOptimization of electrocoagulation process to treat grey wastewater in batch mode using response surface methodology
BACKGROUND Discharge of grey wastewater into the ecological system causes the negative impact effect on receiving water bodies. METHODS In this present study, electrocoagulation process (EC) was investigated to treat grey wastewater under different operating conditions such as initial pH (4-8), current density (10-30 mA/cm2), electrode distance (4-6 cm) and electrolysis time (5-25 min) by usi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Serbian Chemical Society
سال: 2020
ISSN: 0352-5139,1820-7421
DOI: 10.2298/jsc200319037g