Tribological and Thermo-Mechanical Properties of TiO2 Nanodot-Decorated Ti3C2/Epoxy Nanocomposites
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولOptimization of tribological and mechanical properties of nanocomposites of polyurethane/poly(vinyl acetate)/CaCO3.
Properties of samples containing polyurethane (PU), poly(vinyl acetate) (PVAc) and nanosize particles of calcium carbonate (CaCO3) are correlated with concentrations of these components. Interphase phenomena in PU/PVAc/CaCO3 nanohybrids have been studied before, we focus here on wear and scratch resistance. In addition to polymer blends containing CaCO3, the effects of adding CaCO3 with grafted...
متن کاملThermo-mechanical properties of polymer nanocomposites reinforced with randomly distributed silica nanoparticles- Micromechanical analysis
A three-dimensional micromechanics-based analytical model is developed to study thermo-mechanical properties of polymer composites reinforced with randomly distributed silica nanoparticles. Two important factors in nanocomposites modeling using micromechanical models are nanoparticle arrangement in matrix and interphase effects. In order to study these cases, representative volume element (RVE)...
متن کاملThe Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE)
Various applications of nanocomposites were a good motivation to start a study on this wide spreading field of science. Current research is an investigation on incorporating different percentages of TiO2 nanoparticle as reinforcement to a base material which here is poly methyl methacrylate (PMMA). In this study various percentages of TiO2 (0.5, 1 and 2 wt%) were added to pure PMMA and effect o...
متن کاملThe chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites
To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO2 compositions of 1%, 5%, and 10% (kg/kg) and printed str...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2021
ISSN: 1996-1944
DOI: 10.3390/ma14102509